F series NUTRUNNER SYSTEM

2/12

1F series NUTRUNNER SYSTEM“F” series nutrunner system, newly developed by ever progressing nutrunner top manufacturer URYU, has provided greater space saving due to remarkably streamlined elements, and has made open network communication possible.1“F” SERIES DIMENSIONSMain unit 70（W）×265（H）×160（D）Spindle unitUEC-F024H 60（W）×265（H）×160（D）UEC-F060H 74（W）×265（H）×160（D）UEC-F120Ⅱ 90（W）×265（H）×160（D）GREATER SPACE SAVINGSpindle unitOne piece structure containing sub-controller and driver unit has reduced volume space occupancy.●1●2●10●9●8●3●6●4●5●7Main unit UEC-F300MⅡSpindle unit UEC-F024H1‌Power socket AC100〜220V single phase2‌External input/output connector CN IN (PLC1) input signal connector for control signal input (fixed allocation) CN OUT (PLC 2) output signal connector for judgment result and state (output free allocation)3‌Serial port (data input connector) DATA-IN (RS232C) accepts serial numbers etc. provided by an external equipment such as barcode reader, and outputs tightening data together with serial numbers.4‌Serial port (data output connector) PRINTER (RS232C) outputs tightening result to printer (free format).1‌State change switch RUN/BYPASS change switch RUN: Nutrunner operative BYPASS: Nutrunner inoperative2‌External communication device RS485 connector3‌Resolver connector Resolver connection4‌MON. connector (monitor output) Analog torque, voltage, and angle pulse output5‌T/D connector: Transducer connection6‌I/O connector: External input and output control connection7MOTOR connector: Power supply to motor8‌AC IN connector AC200〜220V 3-phase power socket5‌Serial port (data output connector) PLC (RS232C) outputs tightening result data to PLC (free format).6‌Serial port (data output connector) DISPLAY (RS485) outputs tightening result data to touch-panel display unit.7‌User console connector PC (RS232C) for communication with user console.8‌Spindle to spindle communication connector RS485 for internal spindle unit to spindle unit communication9‌Manual switches RESET, START, REVERSE and CAL10‌LED Display POWER, M RUN, OK, NOK and ALARM1‌Manual operation switches START: Manual start (unusable) REVERSE: Manual reverse (unusable)2‌Data display operation switch MODE switch SET switch DATA UP switch DATA DOWN switch Note: UEC-MKB is an optional display unit.●1●2●4●5●6●3●1●2●7●8with UEC-MKBoptional display unitless UEC-MKBcontrols up to 31 spindle units, and directs fastening.SPINDLES1-spindle2-spindle5-spindle10-spindleVOLUME & WIDTH ㎤㎜㎤㎜㎤㎜㎤㎜F-SERIESUEC-F024H551213080561901568837028408670UEC-F060H610614492432181865644034344810UEC-F120Ⅱ6784160106002502204852041128970

※このページを正しく表示するにはFlashPlayer10.2以上が必要です