URYU POWER TOOLS GENERAL CATALOG
82/100

Never use during charging.Weight(about)Code83932× 2.3 kg× 65 (H)83942Soft JointFEATURES946-930-0836-397-3988-835-0836-165-3962-600-0979-018-0836-175-4960-050-0Hard JointTypically 1/10 turn to full torque after the bolt head or nut seats on the surfaceUET-10CUA (115V)UET-10CUE (230V)80SPECIFICATIONSUsage of Testing AttachmentTESTERS & ACCESSORIESDriver Attachment AssemblyApplicable Tool Torque Capacity Range (Recommended Torque ModelTypeCapacity Range)US-LT series Torque-Control Screwdriver Small-type Hand Torque WrenchAccuracyPower SourceBuilt-in Nickel 0.1 - 10 Nm(0.15 - 10 Nm)±0.5% Hydride Batteryat rated outputApply Plate Springs, Testing Bolt (for soft-joint test) Spacer, Nut, and Casing. The Plate Springs are available in both weak and strong tensions.Environmental Dimensions(unit: mm)ConditionOperation Temperature: 160 (W) 0 - 40℃ (No Dew)190 (D) Humidity: 30 - 90% (No Dew)Hexagon Head Bolt (M8 x 35) (12.9)San Blade Holder FlangeThrust Needle Bearing (NTB 1024)Adaptor Belleville Spring (25x12.2x0.9) 9 pcs.Inner Snap Ring (25)CasingHexagon Nut (1-M8)Accessories909-418-0Carrying Case910-907-0AC Adapter (115V)AC Adapter (230V)910-908-0Hexagon Socket Bit (13 × 100) (5 Hex)918-129-0Hexagon Socket Bit (13 × 100) (6.35 Hex) 918-223-0Driver Attachment Assembly836-890-4Hexagon Head Bolt (M8 × 20) (12.9) (For Hard Joint)Plate Spring 25 × 12.2 × 1.5946-928-0962-601-0Apply Testing Bolt (for heard joint test) and Nut (without Casing, Spacer and Plate Spring).• Its built-in torque sensor reads the torque ranging from 0.1 to 10 Nm. • LED digital display helps you read the reading in the darkness. • Hit the RESET button for zero point adjustment.• Supreme accuracy: within ±0.5%.• The CAL diagnostic features help you find any error in the built-in amplifier. • The portability with a built-in battery helps you check tools on site. • The soft-joint attachment comes standard with UET-10CU tester, which allows you to simulate the actual application.• The USB/RS232C port for data output is built in the UET-10CU tester.• Full recharging time is approx. 2-hours. 16-hour continuous operation is possible after full charging.836-890-4Typically 3 turns to full torque after the bolt head or nut seats on the surface.POWER TOOLS GENERAL CATALOGDIGITAL TORQUE TESTERSUET SERIESURYU UET-10CUA/10CUE torque tester is designed to check output torque of US-LT series Torque-Control Screwdriver. Its built-in torque sensor shows the torque reading on LED display.

元のページ  ../index.html#82

このブックを見る