BOLT & NUT SETTERSUCC-100ZUCC-100Z Series System Layout*2 UBX-AF tools can be paired to 1 UCC-100Z.ＵＢＸ-ＡＦ Series11UCC-100Z COMMUNICATION COORDINATORUCC SERIES SPECIFICATIONSMODELPOWER SUPPLYPOWER FREQUENCYINSULATION PROTECTIONPOWER CONSUMPTIONWEIGHTDIMENSIONSMAIN FUNCTIONSPARAMETER SETUPDISPLAYLAMPINPUT TERMINAL SIGNALOUTPUT TERMINAL SIGNALOPTIONCODE (A/E)AC 100-240V ±10% 50/60 Hz DC500V over 10MΩ35VA 2.9kg Without antenna 254(D)×222(W)×99(H) /With antenna 254(D)×233.5(W)×106(H)Torque Control / Angle Monitoring /Fastening CounterManual Input on LCD Panel /Personal Computer (with setup software)Torque Resolution ±2048 (12Bit A/D) LCD: 20 Characters×8 lines Contents: TORQUE / WORK NO. / FASTENING COUNT DOWN NO. / FASTENING TIME / PULSE NO. / ANGLE / ERROR MESSAGECOUNT LAMP: OK (Green) / NOK (Red) FASTENING LAMP: LOW (Yellow) / OK (Green) /HIGH (Red) Operation Voltage / Current: DC24V / approx. 10mA, 6 Terminals (free format) Note: Contact input necessaryContact Capacity: DC30V, 1A, 6 Terminals (free format)Setting PC Cable (Straight) Part Number: 910-219-0 81Z12/81Z02Host computerPC cablePC for setupLAN CableFront panelToolToolHubRear panelPower cableOutlet Front panelPC/Controller*2-Pin ConversionAdapter must be grounded.Sequencer (PLC)POWER TOOLSGENERAL CATALOGUCC SERIESUCC-100ZMultifunctional Coordinator with built-in Wireless unit for UBX-AF Series
元のページ ../index.html#13