URYU POWER TOOLS GENERAL CATALOG
84/96

Vibration-Support the weight of the tool in a stand, tensioner or balancer if possible.-Hold the tool with a light but safe grip taking account of the required hand reaction forces. The risk from vibration is generally greater when the grip force is higher.-Wear warm clothing when working in cold conditions and keep your hands warm and dry. Direct cold air away from the hands.-Use sleeve fittings where practicable.Dust and Fumes-Direct the exhaust so as to minimise disturbance of dust in a dust-filled environment. Where dusts or fumes are created, the priority shall be to control them at the point of emission.Pneumatic Safety-Do not exceed the maximum air pressure stated on the tool.-Use correct hoses and always check for damaged or loose hoses and fittings. Whipping hoses can cause severe injury.-Do not abuse the hose. Never use the hose for carrying, pulling or hanging the tool.-Keep the hose away from heat, oil, sharp edges or moving parts. Damaged or entangled hoses increase the risk.-Never direct air at yourself or anyone else.Electrical Safety-Do not handle the tool, controller, battery or charger with wet hands.-Do not expose the tool, controller, battery and charger to rain or wet conditions.-Do not abuse the power cable. Do not pull the power cable for carrying the tool, controller or charger or disconnecting the power plug from the power point.-Arrange the power cable so that it may not be stepped, caught or stressed for damages.-Do not attempt to open, disassemble, modify or service the battery pack.-Do not crush, puncture, shorten external contracts or circuits, dispose of in fire or water. Keep the battery away from metal objects such as paper clips, coins, keys, screws or other small metal objects that can lead to short circuit.-Do not expose batteries to temperatures above 40˚C.-Keep the battery and charger dry and away from water or any liquid as it may cause a short circuit.-Do not use a battery that appears damaged, deformed or discoloured or the one that has any rust on its casing, overheats or emits a foul odour.-Do not attempt to solder anything to the battery. It will dissolve insulations, destroy the gas exhaust valve or the protection circuit.-Do not place any object on the charger nor cover the battery with flammable things while charging.-Leaks from battery cells can occur under extreme conditions. Do not allow the leaking fluid to come in contact with skin or clothing. If already in contact, flush the affected area immediately with clean water and seek medical advice. If the liquid comes in contact with eyes, DO NOT rub; rinse with clean water immediately for minimum 10 minutes and seek medical help. Liquid ejected from the battery may cause irritation or burns.-Take extra precautions to keep a leaking battery away from fire as there is a danger of ignition or explosion.-Do not use charger if it is damaged by a drop or is with a damaged power cable. OPERATOR'S SAFETY MANUAL FOR URYU POWER TOOLS82POWER TOOLS GENERAL CATALOG

元のページ  ../index.html#84

このブックを見る