HCHCHC---------------------★To do torque adjustment...Remove the Hammer Casing Nut and confirm you seethe Relief Valve Spindle through the hole. Use AllenWrench (1.5mm) to adjust torque. Turn the ReliefValve Spindle clockwise to increase tightening torqueand anti-clockwise to decrease tightening torque. Fixthe Hammer Casing Nut firmly after adjustment.Standard Type （0.5〜0.6MPa）Head SizesModelULT40CULT50CULT60CFreeSpeed(Approx.)Overall Lengthless Socketmin-1(about)ft-lbs0.4MPa0.6MPamm2503300250261275290250261275290350045005200440025004500520043002300Low Air Pressure Type （0.4〜0.5MPa）mm595959inmm161616in5/85/85/82 21/642 21/642 21/64Weightless Socket(about)lbkg2.9 9 27/321.30 9 27/321.353.03.210 9/321.453.610 53/641.654.111 27/641.859 27/321.353.03.210 9/321.453.610 53/641.6511 27/641.854.1From Centerto Outside(about)inmm24.524.524.526.526.524.524.526.526.5in31/3231/3231/321 3/641 3/6431/3231/321 3/641 3/64POWER TOOLS GENERAL CATALOGULT50CULT70CHPNEUMATICOIL-PULSE TOOLS2 types are available for different air pressure level.They can be distinguished by colors.SPECIFICATIONS CapacityModel(Nominal Bolt Size)mm56-888inULT40CULT50CULT60CULT70CULT70CHULT50CLULT60CLULT70CLULT70CHLNo.101/4-5/165/165/168-106-8885/16-3/81/4-5/16 7.0-15.5 5.2-11.5 9.6-20.714.8-25.922.2-37.05/165/168-105/16-3/8Torque Range0.4~0.5MPa0.5~0.6MPaNm-----ft-lbsNm4.5-7.53.33-5.55 7.0-15.5 5.2-11.5 9.6-20.714.8-25.922.2-37.013-2820-3530-5013-2820-3530-50Modelmm7077inmm1822ULT70CULT70CH2 3/43 1/3245/647/8Sq. DriveShankAverageAirConsumptionCodemm 9.5 9.5 9.5 9.512.7 9.5 9.5 9.512.7inm3/minft3/min7.03/83/88.610.53/812.33/812.31/23/87.08.63/89.53/81/29.50.200.250.300.350.350.200.250.270.27126921273212752127721129212742127621278211302in35Air Inlet Size : NPT 1/4"Air Hose Size : 10mm×6.5mm×5m for ULT40C〜50C(L) 12mm×8.0mm×5m for ULT60C〜70C(L) , and 70CH(L)*Torque Range is a guideline value. Please make tool selection appropriately in accordance with an actual application. Recommended Air Pressure : 0.4MPa (57psi) - 0.6MPa (85psi)CORNER TYPE ULT SERIESULT SERIES [SHUT OFF TYPE]Easy to operate in narrow area.Reliable fastening with oil-pulse wrench.←Remove this way
元のページ ../index.html#37